What Is a UPS Power Cable? How to Choose the Right Power Cable for a UPS
A UPS, or Uninterruptible Power Supply, is an important power system that allows connected devices to continue operating during power outages or electrical disturbances.
However, the reliable operation of a UPS does not depend solely on the quality of the UPS unit. The power cables used for connections between the UPS, mains power, PDU, servers, and other devices must also be selected correctly.
Especially in data centers, server systems, network infrastructure, office computers, and professional electronic systems, choosing the right IEC power cable is essential.
As a manufacturer, Power Kablo offers UPS power cables and custom power cable solutions with different IEC connection types, cable cross-sections, and lengths.
What Is a UPS Power Cable?
A UPS power cable is a power cable used to transfer electrical energy between a UPS system and the electrical mains or devices connected to the UPS.
However, the term “UPS power cable” does not refer to a single cable type.
Depending on the UPS model and connection configuration, different combinations may be used, such as:
C13
C14
C19
C20
C13-C14
C19-C20
C14-C19
Schuko-C13
Different country-specific plugs + IEC connectors
Power Kablo’s AC Power and Power Cables category includes different IEC and power cable solutions. (Fişli Kablo Spiral Kablo)
Which IEC Cables Are Used in UPS Systems?
The connection type used in a UPS system depends on its inputs and outputs.
For example, if a device has a C14 inlet, a suitable C13 power cable can be used.
For higher-power equipment with a C20 inlet, an appropriate C19 power cable may be required.
Therefore, the first step when selecting a UPS cable is to identify the connection type on the back of the device.
The most common connection types include:
IEC C13
IEC C14
IEC C19
IEC C20
C13/C14 and C19/C20 are different connection pairs within the IEC 60320 family. C13/C14 are commonly found on general electronic equipment, while C19/C20 can be used in higher-power professional systems. (Fişli Kablo Spiral Kablo)
What Is a C13 UPS Power Cable?
C13 is the female IEC connector located on the cable side.
C13 connections can be used in many systems, including:
Computers
Monitors
Servers
UPS systems
PDUs
Network equipment
Professional electronic equipment
Power Kablo’s “IEC C13 C14 Kablo Nedir?” content explains the differences, applications, and cable selection criteria for C13 and C14 connections in detail. (Fişli Kablo Spiral Kablo)
For example, if a device has a C14 inlet, the cable must have a C13 connector on the device side.
In other words:
UPS/Device C14 → Cable C13
What Is C14?
C14 is the male IEC inlet located on the equipment side.
It is used together with C13.
Simply put:
C13 → Cable side
C14 → Device side
For this reason, the terms “C13 cable” and “C14 device inlet” are often used together.
Power Kablo’s IEC C13 C14 Kablo page provides further technical information about this connection. (Fişli Kablo Spiral Kablo)
C13-C14 UPS Power Cable
One of the most common combinations in UPS systems is the C13-C14 connection.
In this configuration:
C13 → Cable side
C14 → Other device side
Power Kablo offers this type of power cable in its C13-C14 Monitor Power Cable product group.
The catalog also includes different cable cross-sections and length options. (Fişli Kablo Spiral Kablo)
What Is a C19 UPS Power Cable?
C19 is one of the larger IEC connectors used in professional systems requiring higher power.
It can be encountered in applications such as:
High-power UPS systems
PDUs
Servers
Data center equipment
Network infrastructure
Professional IT systems
Power Kablo’s IEC C19 C20 Güç Kablosu content explains the applications of C19/C20 connections and their differences from C13/C14 in detail. (Fişli Kablo Spiral Kablo)
C19-C20 UPS Power Cable
In a C19-C20 connection:
C19 → Cable-side connector
C20 → Device-side inlet
It can be used in high-power UPS, PDU, and server systems.
Power Kablo’s catalog includes the following product codes for C19-C20 cables:
Product Code Product Cable
PWR146 C19-C20, 1.5 meters H05VV-F 3×1.5 mm²
PWR147 C19-C20, 1.5 meters H05VV-F 3×2.5 mm²
PWR148 C19-C20, 3 meters H05VV-F 3×1.5 mm²
PWR149 C19-C20, 3 meters H05VV-F 3×2.5 mm²
These product codes are confirmed in the Power Kablo catalog document. (Fişli Kablo Spiral Kablo)
Product codes and technical options can be reviewed through the Power Kablo catalog. (Fişli Kablo Spiral Kablo)
C14-C19 UPS Power Cable
UPS and PDU systems do not only use C19-C20 connections.
Some systems may require a C14-C19 combination.
Power Kablo’s catalog includes:
Product Code Product Cable
PWR150 C14-C19, 1.5 meters H05VV-F 3×1 mm²
PWR151 C14-C19, 1.5 meters H05VV-F 3×1.5 mm²
PWR152 C14-C19, 3 meters H05VV-F 3×1 mm²
PWR153 C14-C19, 3 meters H05VV-F 3×1.5 mm²
Therefore, instead of simply specifying a “C19 cable” in a UPS or PDU project, it is more accurate to specify both connection sides and the product code where applicable.
Is a C13-C20 Cable Used?
Different IEC connection combinations may be required in certain specialized power distribution applications.
If a C13-C20 combination is required, the technical documentation of the equipment and power distribution system should be checked.
The important point is not only whether the connectors can physically connect, but also whether the electrical requirements of the system are compatible.
Power Kablo does not provide unverified product URLs. If a product can be verified through the catalog or product page, we will link directly to the relevant verified page.
Schuko-C13 UPS Power Cable
One of the common combinations used with UPS systems and electronic equipment in Türkiye and Europe is:
Schuko → C13
Here:
Schuko → Mains side
C13 → Device side
Power Kablo’s “Schuko Fiş Nedir?” content also explains the use of Schuko and C13 connections. (Fişli Kablo Spiral Kablo)
Cable Cross-Section in UPS Power Cables
When selecting a UPS power cable, looking only at whether the connection is C13 or C19 is not sufficient.
Cable cross-section must also be considered.
Power Kablo products and catalog options include different cross-sections, such as:
3×1 mm²
3×1.5 mm²
3×2.5 mm²
(Fişli Kablo Spiral Kablo)
Cable cross-section should be evaluated based on:
Equipment power requirements
Operating current
Cable length
Ambient temperature
Cable type
Installation method
Applicable technical requirements
A thicker cable is not automatically the correct choice for every application.
H05VV-F Cable in UPS Power Cables
Power Kablo’s catalog uses H05VV-F cable in products such as C19-C20 and C14-C19 cables. (Fişli Kablo Spiral Kablo)
For example:
PWR146 → C19-C20 / H05VV-F / 3×1.5 mm² / 1.5 meters
Similarly:
PWR147 → C19-C20 / H05VV-F / 3×2.5 mm² / 1.5 meters
Therefore, when ordering a product, it is important to specify not only the IEC connection but also the cable type and cross-section.
Cable Length in UPS Power Cables
Cable length should also be selected according to the intended installation.
Power Kablo’s catalog products include 1.5-meter and 3-meter C19-C20 options. (Fişli Kablo Spiral Kablo)
However, an OEM equipment manufacturer may require, for example:
2.2 meters
4 meters
In such cases, the customer does not have to be limited to standard products.
As a manufacturer, Power Kablo can evaluate custom production requests according to the required dimensions and technical specifications.
UPS → PDU → Server Cable Chain
In professional systems, it is not correct to evaluate the UPS power cable independently.
Consider the following system:
Mains → UPS → PDU → Server
In this configuration:
UPS connection
UPS output
PDU input
PDU output
Server power input
must be compatible with one another.
Especially in rack cabinets, C13/C14 and C19/C20 connections can be used at different points within the same system.
Power Kablo’s IEC C19 C20 Güç Kablosu content also addresses the UPS → PDU → Server connection chain. (Fişli Kablo Spiral Kablo)
Country-Specific Plug Standards
The mains plug on the other side of the UPS cable may vary depending on the country of use.
For example:
European/Schuko
American/NEMA
British/BS 1363
Australian
Israeli
South African
standards may be used.
Power Kablo’s İngiliz Fişli Kablo and İngiliz Power Kablosu product content also includes British-plug UPS and C13 solutions. (Fişli Kablo Spiral Kablo)
Custom UPS Power Cable Manufacturing at Power Kablo
Standard products may not meet every customer’s requirements.
For example, one customer may require:
C19-C20 / 3×2.5 mm² / 4 meters
while another may need:
Schuko / C13 / 3×1.5 mm² / 2.5 meters
An OEM manufacturer may require a custom combination of:
Custom length + custom cross-section + custom plug + IEC connection + custom color
As a manufacturer, Power Kablo can evaluate such custom production and OEM requirements.
Why Is the Product Code Important When Ordering a UPS Power Cable?
Especially for bulk purchases, using a product code helps reduce the possibility of ordering or shipping the wrong product.
For example, when PWR146 is specified, the corresponding catalog definition can be referenced as:
C19-C20 / H05VV-F / 3×1.5 mm² / 1.5 meters
Similarly:
PWR147 → C19-C20 / 3×2.5 mm² / 1.5 meters
Therefore, in future articles, we will use the product name + IEC code + Power Kablo product code, where available, and link to the relevant verified page.
Differences Between C13, C14, C19 and C20 in UPS Power Cables
When selecting a power cable for a UPS system, C13, C14, C19, and C20 are among the most common connection types. However, each has a different function and they should not be substituted for one another without checking compatibility.
Especially in professional power distribution systems such as UPS → PDU → Server, the connection type, cable cross-section, cable length, and plug type should all be considered together.
As a manufacturer, Power Kablo offers standard products for these connection types as well as custom production according to the required cross-section and length.
What Are C13 and C14?
C13 is the female IEC connector located on the cable.
C14 is the male IEC inlet located on the equipment.
Therefore, a conventional:
C13 → C14
power cable connects the C13 cable connector to the C14 equipment inlet.
What Are C19 and C20?
C19 is the female IEC connector located on the cable side.
C20 is the male inlet located on the equipment side.
Therefore:
C19 → C20
forms the corresponding connection.
C19/C20 connectors are physically larger than C13/C14 connectors and are commonly found in professional systems requiring higher power. (Fişli Kablo Spiral Kablo)
Key Difference Between C13 and C19
Feature C13 / C14 C19 / C20
Cable-side connector C13 C19
Equipment-side connector C14 C20
Physical structure Smaller Larger
Typical use General electronic systems Higher-power systems
Common applications PCs, monitors, some servers UPS, PDU, servers, data centers
Therefore, if a device has a C20 inlet, it is not correct to use a C13 cable simply because the connectors may appear similar. The connection type specified by the equipment manufacturer must be used. (Fişli Kablo Spiral Kablo)
Should You Use C13 or C19 with a UPS?
There is no single answer.
The UPS model and its connection configuration must be checked.
For example, if a UPS has a:
C14 output → suitable C13 cable
connection may be required.
If the UPS has a:
C20 output → suitable C19 cable
may be required.
Therefore, when ordering a UPS power cable, it is much more accurate to specify the UPS input and output connections rather than simply requesting a “UPS cable.”
C13-C14 UPS Cable
C13-C14 is a commonly encountered UPS power cable combination.
For example:
UPS C14 → C13 cable → device
can form the connection.
Power Kablo’s IEC C13 C14 Kablo content provides further information about the technical specifications and applications of this connection.
The important point is that C13 is on the cable side, while C14 is the equipment-side inlet.
C19-C20 UPS Power Cable
C19-C20 connections can be used in professional systems requiring higher power.
Typical applications include:
UPS systems
PDUs
Servers
Data centers
Network infrastructure
Professional IT systems
(Fişli Kablo Spiral Kablo)
Power Kablo’s catalog includes different cross-section and length options in the C19-C20 product group. For example, product codes PWR146, PWR147, PWR148, and PWR149 belong to the C19-C20 group. (Fişli Kablo Spiral Kablo)
Power Kablo C19-C20 Product Catalog
PWR146 — C19-C20 Power Cable
Power Kablo’s catalog lists PWR146 as a C19-C20 power cable with H05VV-F 3×1.5 mm² cable and a length of 1.5 meters. (Fişli Kablo Spiral Kablo)
Therefore, when ordering by product code, the technical definition should also be checked.
PWR146 → C19-C20 → H05VV-F → 3×1.5 mm² → 1.5 meters
PWR147 — C19-C20 Power Cable
PWR147 is listed in the catalog as:
C19-C20 + H05VV-F + 3×2.5 mm² + 1.5 meters
(Fişli Kablo Spiral Kablo)
This product differs from PWR146 in terms of cable cross-section.
Therefore, instead of simply requesting a “C19-C20 cable,” specifying the product code where necessary can improve ordering accuracy.
PWR148 and PWR149
Power Kablo’s catalog lists:
PWR148 → C19-C20 / H05VV-F / 3×1.5 mm² / 3 meters
PWR149 → C19-C20 / H05VV-F / 3×2.5 mm² / 3 meters
(Fişli Kablo Spiral Kablo)
This provides different cable cross-section and length options within the same C19-C20 connection family.
This distinction is particularly important in rack and data center applications.
C14-C19 UPS and PDU Cable
Some systems may require a C14-C19 connection instead of C13-C14 or C19-C20.
These cables can be used in UPS, PDU, and professional power distribution systems.
Power Kablo’s C14-C19 Power Cable product page specifies this connection as a grounded 2P+E configuration rated at 10 A and 250 V. (Fişli Kablo Spiral Kablo)
The catalog also includes:
PWR150 → C14-C19 / 3×1 mm² / 1.5 meters
PWR151 → C14-C19 / 3×1.5 mm² / 1.5 meters
PWR152 → C14-C19 / 3×1 mm² / 3 meters
PWR153 → C14-C19 / 3×1.5 mm² / 3 meters
(Fişli Kablo Spiral Kablo)
Choosing the Right Cable in a UPS → PDU → Server Connection
In a professional system, the cable should be evaluated as part of the complete power chain.
For example:
Mains → UPS → PDU → Server
may contain several connection points.
The UPS output may be C13, the PDU input may use another IEC connection, and the server input may use a different connection.
Therefore, the following information should be determined first:
What is the UPS output?
What is the PDU input?
What are the PDU outputs?
What are the server inputs?
What cable length is required for each connection?
The correct cable combination can then be selected.
3×1.5 mm² or 3×2.5 mm²?
This question frequently arises when ordering C19-C20 power cables.
Power Kablo’s catalog includes both 3×1.5 mm² and 3×2.5 mm² C19-C20 options. (Fişli Kablo Spiral Kablo)
However, the selection should not simply be:
“The UPS is high-power, so I will automatically choose 3×2.5 mm².”
Instead, consider:
UPS power → operating current → cable length → cable type → operating conditions → technical specification
The equipment manufacturer’s technical specification should be the primary reference, especially in high-power UPS and PDU applications.
Cable Length in UPS Power Cables
Cable length is another important selection criterion.
Power Kablo’s C19-C20 products are available in 1.5-meter and 3-meter versions. (Fişli Kablo Spiral Kablo)
However, a customer may require:
2 meters
2.5 meters
4 meters
5 meters
In such cases, the customer does not necessarily have to be limited to standard products.
As a manufacturer, Power Kablo can evaluate custom production according to the required dimensions and technical specifications.
OEM UPS Power Cable Manufacturing
For:
UPS manufacturers
PDU manufacturers
Server manufacturers
Data center companies
Rack system manufacturers
OEM electronic equipment manufacturers
standard catalog dimensions may not always be sufficient.
For example, a custom order may be:
C19 + custom plug + 3×2.5 mm² + 4 meters
Another customer may require:
C14 + C19 + 3×1.5 mm² + 2 meters
In these cases, the IEC connection, cable cross-section, cable type, length, plug, and intended application can be evaluated together for production planning.
Conclusion
Selecting a UPS power cable is not simply a matter of knowing whether the connection is C13, C14, C19, or C20.
For the correct product, the following should be evaluated together:
IEC connection
Cable cross-section
Cable type
Cable length
Mains plug
UPS/PDU/device connections
As Power Kablo, we provide different IEC power cable solutions such as C13-C14, C19-C20, and C14-C19, as well as custom dimensions, custom cross-sections, and OEM production solutions.
How to Calculate Cable Cross-Section, Current, and Power for UPS Power Cables
When selecting a UPS power cable, choosing the correct cable cross-section is just as important as identifying the correct C13, C14, C19, or C20 connection.
Especially in UPS, PDU, server, and data center applications, physical compatibility alone is not sufficient. Cable type, number of conductors, cross-section, length, load current, and operating conditions should all be evaluated together.
As a manufacturer, Power Kablo produces power cables in different cross-sections and lengths and can also evaluate custom dimensions and custom cross-section requirements.
Why Is Cable Cross-Section Important in UPS Power Cables?
The conductor cross-section is one of the fundamental characteristics affecting the electrical properties of a power cable.
Power Kablo products and catalog options include different cross-sections, such as:
3×1 mm²
3×1.5 mm²
3×2.5 mm²
(Fişli Kablo Spiral Kablo)
However, a larger cross-section does not automatically mean that a cable is the correct choice for every application.
Cable cross-section should be evaluated according to the equipment’s operating current, cable length, installation environment, cable type, and applicable technical requirements.
Difference Between 3×1 mm², 3×1.5 mm², and 3×2.5 mm²
For example:
Cable Number of conductors Conductor cross-section
3×1 mm² 3 1 mm²
3×1.5 mm² 3 1.5 mm²
3×2.5 mm² 3 2.5 mm²
All three have the same number of conductors, but their conductor cross-sections are different.
Therefore, 3×1 mm² and 3×2.5 mm² cables do not have the same electrical characteristics.
Power Kablo’s product groups include these different cross-section options. For example, H05VV-F cables in the catalog are available in 3×1, 3×1.5, and 3×2.5 mm² configurations. (Fişli Kablo Spiral Kablo)
How Is UPS Power Calculated?
For a single-phase system, the basic electrical power calculation is:
P = V × I
where:
P = Power (Watts)
V = Voltage (Volts)
I = Current (Amps)
For example, using 230 V and 10 A:
230 × 10 = 2,300 W
This is a theoretical calculation and does not mean that a particular cable can automatically carry 2,300 W continuously.
Actual cable selection must also take into account the cable characteristics, connectors, operating conditions, and system requirements.
What Does 16 A Mean for C19-C20 Cables?
C19/C20 connections are commonly associated with 16 A-rated IEC connections. Power Kablo’s C19-C20 content also addresses the nominal ratings and relationship of these connections to higher-power applications. (Fişli Kablo Spiral Kablo)
Using 230 V for a theoretical calculation:
230 V × 16 A = 3,680 W
However, this should not be interpreted as:
“Every C19-C20 cable can continuously operate at 3,680 W.”
The complete electrical system must be evaluated, including:
Cable
Plug
IEC connector
Socket
Circuit protection
Ambient temperature
Cable length
Actual equipment load
Why Should Cable Length Be Considered?
Cable length is as important as cable cross-section.
A 1.5-meter power cable and a much longer cable do not necessarily operate under identical conditions.
As cable length increases, total conductor resistance also increases, and voltage drop may become an important consideration depending on the application.
Therefore, cable length should be specified before ordering, particularly for:
Long UPS cables
PDU connections
Rack systems
Industrial applications
High-power systems
3×1.5 mm² or 3×2.5 mm²?
This is a common question when ordering C19-C20 power cables.
Power Kablo’s catalog includes both 3×1.5 mm² and 3×2.5 mm² options for C19-C20 products. (Fişli Kablo Spiral Kablo)
However, the selection should be based on:
UPS power → operating current → cable length → cable type → operating conditions → technical specification
rather than automatically choosing the larger cross-section.
Why Is H05VV-F Cable Used in UPS Systems?
H05VV-F is a cable type used in various power cable applications.
Power Kablo’s catalog includes H05VV-F cables in:
3×1 mm²
3×1.5 mm²
3×2.5 mm²
configurations. (Fişli Kablo Spiral Kablo)
For example, Power Kablo’s catalog lists PWR174 as a 2-meter female-male power cable using H05VV-F 3×1.5 mm², while PWR180 is listed as a 2-meter female-male cable using H05VV-F 3×2.5 mm². (Fişli Kablo Spiral Kablo)
Therefore, an order should specify cable type + number of conductors + cross-section + length rather than simply saying “three-core cable.”
Number of Conductors in a UPS Power Cable
For example:
3×1.5 mm²
means:
3 conductors
Each conductor has a cross-section of 1.5 mm²
It does not mean a single 1.5 mm² conductor.
For grounded power connections, the conductor configuration must be suitable for the system requirements.
Therefore, instead of simply specifying “1.5 mm cable,” a more accurate technical description is:
H05VV-F 3×1.5 mm²
Cross-Section Selection for C13-C14
Having a C13/C14 connection does not automatically determine the cable cross-section.
Different applications may use combinations such as:
C13 + 3×1 mm²
or:
C13 + 3×1.5 mm²
The equipment’s technical requirements should determine the selection.
Power Kablo’s technical content on IEC C13-C14 power cables also explains the applications and selection criteria for this connection.
Cross-Section Selection for C19-C20
The same principle applies to C19/C20 connections.
Power Kablo’s catalog includes C19-C20 products with different cross-sections and lengths. (Fişli Kablo Spiral Kablo)
Therefore, an order can be specified clearly as:
C19-C20 + 3×1.5 mm² + 1.5 meters
or:
C19-C20 + 3×2.5 mm² + 3 meters
Further technical information about C19-C20 power cables can be found in Power Kablo’s relevant content.
Cable Cross-Section and Heating
As current increases, heat generation in a power cable becomes increasingly important.
Therefore, cable selection should not be evaluated only by asking:
“Does the device work?”
For systems operating under high loads for extended periods, the cable must have suitable characteristics.
This is particularly important in continuously operating systems such as:
Servers
UPS systems
PDUs
Data centers
Industrial equipment
Ambient Temperature in UPS Power Cables
Ambient temperature can also affect cable selection.
The same cable may not operate under identical conditions in:
A normal office environment
An enclosed rack
A high-temperature environment
A poorly ventilated installation
Therefore, professional projects should consider not only cable cross-section but also cable type and operating temperature requirements.
Cable Management in UPS and PDU Systems
Cable length is important not only electrically but also for cable management.
Consider a rack containing 10 servers.
Using unnecessarily long cables for every device can result in:
Cable clutter
Restricted airflow
More difficult maintenance
Unnecessary cable bending
For this reason, professional installations should use cable lengths appropriate to the application wherever possible.
Custom Production When Standard Dimensions Are Not Enough
Not every customer requires a standard 1.5-meter or 3-meter cable.
For example:
C19-C20 + 3×2.5 mm² + 2.2 meters
may be required.
Another project may require:
C13 + 3×1.5 mm² + 4 meters
In such cases, custom production can be considered.
Power Kablo’s manufacturing capability provides flexibility in such applications.
Depending on the requirements, the following can be planned:
Cable cross-section
Cable length
IEC connection
Mains plug
Cable type
Color
Labeling
Technical Specifications in OEM Production
For high-volume OEM production, technical specifications should be defined clearly from the beginning.
For example, an OEM customer may specify:
Product: C19-C20 power cable
Cable: H05VV-F
Cross-section: 3×2.5 mm²
Length: 3 meters
Plug: European type
Quantity: 5,000
These details help ensure a clearer production and quality-control process.
As a manufacturer, Power Kablo can evaluate power cable production according to such custom dimensions and technical specifications.
How Can Incorrect Cable Cross-Section Be Avoided?
Instead of writing only:
“C19-C20 cable”
on an order form, the complete technical definition should be provided whenever possible.
For example:
C19-C20 / H05VV-F / 3×2.5 mm² / 3 meters
is a more precise specification.
If a product code exists, it can also be included.
This helps establish clearer technical expectations between the customer and manufacturer.
Cable Cross-Sections at Power Kablo
Power Kablo’s products and catalogs include power cables in different cross-sections. For example, H05VV-F products are available in 3×1, 3×1.5, and 3×2.5 mm² configurations. (Fişli Kablo Spiral Kablo)
Therefore, custom cross-section and length requirements can be considered in addition to standard products.
This flexibility is particularly valuable for OEM projects.
Conclusion
Selecting the correct UPS power cable requires more than simply identifying the IEC connection.
Along with:
C13 / C14 / C19 / C20
the following should be considered:
Cable type + number of conductors + cross-section + length + current + power + operating environment
In particular, when choosing between 3×1 mm², 3×1.5 mm², and 3×2.5 mm², the actual requirements of the equipment should determine the selection.
As Power Kablo, we offer standard power cables as well as custom production and OEM solutions in the required dimensions, cross-sections, and technical specifications.
UPS Power Cable Selection: Quality Control, Custom Production, and OEM Solutions
When selecting a UPS power cable, identifying the connection type is important, but so are correct manufacturing specifications and quality-control processes.
The presence of the correct C13, C14, C19, or C20 connection alone is not sufficient. Cable cross-section, cable type, length, plug, connection quality, and intended application should all be considered together.
As a manufacturer, Power Kablo produces standard power cables as well as custom-size, custom-cross-section, and OEM power cable solutions according to customer technical specifications.
Why Is Quality Control Important for UPS Power Cables?
UPS systems often supply computers, servers, network devices, and other critical electronic equipment.
Therefore, the following should be evaluated as a complete system:
Correct IEC connection
Correct cable cross-section
Correct cable length
Secure plug connection
Correct conductor connection
Proper mechanical strain relief
Suitable insulation
Required electrical testing
For example, in a C13-C14 Power Cable order, it is important not only to have C13 and C14 connectors but also to ensure that the cable has the specified cross-section and length.
First Production Check: Correct Product
Before production begins, the order’s technical specifications should be clearly defined.
For example, if the requested product is:
C19-C20 / H05VV-F / 3×2.5 mm² / 3 meters
all of these specifications should be considered during production.
Power Kablo’s catalog includes different C19-C20 products with different cross-sections and lengths. For example, product codes PWR146, PWR147, PWR148, and PWR149 belong to the C19-C20 product group.
Using a product code can therefore help identify the correct product, especially for high-volume orders.
Cable Cross-Section Control
The cable cross-section specified in the order must be correct.
For example:
3×1 mm²
3×1.5 mm²
3×2.5 mm²
are different products.
Power Kablo’s catalog includes these cross-section options in different power cable products.
Therefore, instead of simply specifying “1.5 mm cable,” it is preferable to use a complete technical description such as:
H05VV-F 3×1.5 mm²
Cable Length Control
The UPS cable length should also comply with the order specifications.
Cable length is particularly important in rack systems.
For example:
1.5 meters
and
3 meters
do not necessarily offer the same installation advantages.
An unnecessarily long cable can create cable clutter inside a rack, while an excessively short cable may create mechanical stress at the connection point.
Power Kablo offers different standard lengths and can also plan custom-length production according to customer requirements.
C13, C14, C19, and C20 Verification
Correct IEC connector selection is particularly important during production.
C13
The female IEC connector located on the cable side.
C14
The male IEC inlet generally located on the equipment side.
C19
An IEC connector used in professional applications requiring higher power.
C20
The equipment-side inlet that mates with C19.
Because these connections have different physical structures, verifying the product code and connection type during production is important.
Plug Type Verification
The mains plug is just as important as the IEC side of a UPS power cable.
Depending on the country of use, the cable may require:
European type
Schuko
American type
British type
Australian type
Other country-specific standards
For example, Power Kablo’s 16 Amp European C13 PC Power Cable and 15 Amp American C13 PC Power Cable are products intended for different country standards.
Therefore, the destination country should always be specified for export orders.
Mechanical Strength During Cable Assembly
Mechanical connection quality is as important as electrical connection quality in a power cable.
The connection between the cable and the plug or IEC connector must be secure.
Applications such as:
Rack systems
Server rooms
UPS systems
Industrial machines
Equipment subject to continuous movement
may require additional consideration of pulling and bending conditions.
Electrical Testing
Post-production testing should be determined according to the product’s technical specifications and applicable requirements.
Where required, tests may include:
Conductor continuity
Protective-earth continuity
Polarity
Insulation
Electrical safety
Connection verification
The purpose is not simply to determine whether the product works, but to verify that production complies with the defined technical requirements.
Quality in UPS → PDU → Server Systems
In professional data center applications, the power cable should not be evaluated in isolation.
For example:
Mains → UPS → PDU → Server
may involve multiple power cables.
One point may use:
C13-C14
while another may require:
C19-C20
or:
C14-C19
Power Kablo’s C14-C19 Power Cable product also provides a solution for this connection combination.
Therefore, all connections within the system should be identified in advance.
Custom Production When Standard Products Are Not Enough
Not every customer’s requirements can be met by standard catalog products.
For example, a customer may require:
C19-C20 / 3×2.5 mm² / 2.2 meters
The fact that the catalog offers 1.5-meter and 3-meter versions does not mean that the customer must choose one of those two lengths.
Custom-length production can be planned according to the technical specification.
Similarly, the following requirements can be considered:
Custom cable cross-section
Custom length
Custom plug
Custom IEC connection
Custom cable type
Custom color
Labeling
OEM packaging
Custom Production in the Required Cable Cross-Section
One of Power Kablo’s advantages for OEM customers is production flexibility.
Depending on the equipment, production may require:
3×1 mm²
3×1.5 mm²
3×2.5 mm²
or another cross-section specified in the technical requirements.
The important point is not simply changing the cable, but ensuring that the IEC connector, plug, cable type, and electrical requirements are also compatible with the selected cable.
Custom-Length UPS Cable Production
Standard products are generally manufactured in specific lengths.
However, OEM production may require different lengths according to equipment or rack dimensions.
For example:
1.8 meters
2.2 meters
2.75 meters
4 meters
may be requested.
As a manufacturer, Power Kablo can evaluate custom-length UPS power cable production according to the customer’s technical specifications.
OEM Power Cable Manufacturing
OEM production is particularly important for manufacturers producing equipment in series.
For example, an equipment manufacturer may require:
10,000 units
of power cables with identical technical specifications.
The cables can be manufactured with the same:
Length
Cross-section
IEC connection
Plug type
Cable type
Color and marking
Power Kablo’s manufacturing capability provides an important advantage in this type of application.
The objective is not simply to sell a ready-made product, but to develop a power cable solution that meets the customer’s technical requirements.
Advantages of Ordering by Product Code
Using product codes can reduce confusion in bulk purchasing.
For example:
PWR146
PWR147
PWR148
PWR149
identify different products within the same connection family.
Therefore, in quotation and purchasing processes, it is preferable to provide:
Product name + product code + cable cross-section + length
together.
UPS Power Cable Ordering Checklist
Before placing an order, check the following:
UPS brand/model
UPS input connection
UPS output connection
C13 / C14 / C19 / C20 connection
Mains plug
Cable type
Cable cross-section
Cable length
Current/power requirements
Operating environment
Quantity
Product code, if available
Custom production requirements, if applicable
Having this information clearly defined makes both the quotation and production processes easier.
Custom UPS Power Cable Production with Power Kablo
As Power Kablo, we do not only offer standard products; as a manufacturer, we also evaluate customers’ custom requirements.
Depending on the application, solutions can be planned with:
C13
C14
C19
C20
and different IEC combinations, together with:
Custom cable cross-section
Custom length
Different mains plug
Different cable type
Custom color
OEM production
All Power Kablo power cable products can be reviewed through our AC Power and Power Cables category.
Conclusion
Selecting a UPS power cable is not simply a question of “C13 or C19?”
For the correct product, the following should be evaluated together:
IEC connection
Cable cross-section
Cable type
Cable length
Mains plug
Current and power requirements
Operating environment
When standard products are not sufficient, custom dimensions and custom cross-section production can provide an important advantage.
As Power Kablo, we provide standard and OEM power cable solutions for UPS, PDU, server, rack, and various electronic systems.
© 2019 Copyright 2021, Power Kablo.